Saturday, October 1, 2011

How do you do a burnout in a chevy prizm?

I have a Chevy Prizm, front wheel drive, and was wondering how to do a burnout in it. Thanks|||Throw about 3 cups of gasoline on each front tire, and dribble some from one tire to the other, then get behind the wheel and start the car, Just as you are about to floor it, have a buddy toss a match into the gas, and you will have the best burn-out your ever had. Guaranteed.|||Auto: Neutral drop or handbrake + throttle


Std: Dump the clutch|||Kerosene %26amp; matches.|||I don't think your car has the torque to do a real burn out. You could pour bleach on the front tires and yank the parking brake and try that way. If that doesn't work, your going to have to sell your economy car and get a sport car (like a civic). If you really want to do burn outs, get an old police interceptor, like the 96' Crown Victoria I have. Posi traction and gobs of HP make for nice smokey burn outs and I get 22mpg on the freeway|||UMMM don't





it's not cool... and your prism isn't a race car. Your just going to look pathetic if you do.|||If you don't care about the car's finis, you could launch from a spot where a small spot of bleach has been laid down. Generates more smoke that way.|||Back up to about 30 MPH, put it in a forward gear right from reverse, drive if an automatic, mash the gas pedal. First , or second gear if its a standard, dump the clutch and mash the gas pedal. Once it gets spinning pull the hand brake up just enough to let the car move some but not take off.|||set the parking brake, hook it to a Chevy pickup and drag it|||only on wet pavement

No comments:

Post a Comment