How can I program a 2009 Chevy Impala transmitter?

Can I Program the transmitter without going to the Chevy dealership?|||The following instructions are for the 08 Impala...don't know if they will work but its worth a shot.





Use this Procedure for Vehicles with


Driver Information Center Buttons





This information is in your Owners Manual in the


Drivers Information Center Section.





1. Insert Key and turn to ON position so you can access Driver Information Center





2. Press the vehicle information button until


PRESS TO RELEARN REMOTE KEY displays





3. Press the set/reset button until


REMOTE KEY LEARNING ACTIVE displays





4. Press and hold the lock and unlock buttons on the first keyless remote at the same


time for approximatley 15 seconds. A chime will sound indicating that the remote is


programmed.





5. To program additional remotes at this time repeat step 3.


This vehicle can have a maximum of eight remotes programmed.





6. To exit programming mode turn key off and remove key.


Test remote(s).





--------------------------------------鈥?br>







Use this Procedure for Vehicles without


Drivers Information Center Buttons








To access this display, the vehicle must be in Park (P) with key in the on position (as far


as you can go without cranking engine)





1. Press the trip odometer reset stem until RELEARN REMOTE KEY displays.





2. Press and hold the trip odometer reset stem for three seconds.


The message REMOTE KEY LEARNING ACTIVE will display





3. Press and hold the lock and unlock buttons on the first keyless remote at the same


time for approximately 15 seconds. A chime will sound indicating that the remote is


programmed.





4. To program additional remotes at this time repeat step 3.


This vehicle can have a maximum of eight remotes programmed.





5. To exit programming mode turn key off and remove key.


Test remote(s).